NIKK MOLE Colorant Correction System

Instructions for Use: Nikk Mole Colorant Correction System

Components A and B must always be used together.
This product is for professional use only.

Usage:

Mixing:

• Mix equal parts of Components A and B until a homogeneous mixture is achieved.
• Always use a non-metallic container.

Application:

1. Apply the mixture evenly to dry eyebrow hairs.
2. The mixture must be applied immediately after preparation, as its activity lasts for 20–30 minutes.

Processing Time:

• Monitor the process visually and adjust the processing time based on the desired result:
  • Partial Color Correction: Component A (1 part) + Component B (1 part) – processing time 5–10 minutes.
  • Complete Color Removal: Component A (1 part) + Component B (1 part) – processing time 10–20 minutes.

Note: Do not exceed the recommended processing time!

Result Evaluation:

• After assessment:
  • If the result is unsatisfactory, remove the mixture with a dry cotton pad and apply a fresh mixture for another 3–5 minutes. Repeat no more than 3 times.
  • If the result is satisfactory, rinse thoroughly using a wet cotton pad and wash the eyebrows with shampoo 3–4 times in a row.

Post-Treatment:

• Check the result by applying a 3% oxidizer to the eyebrows for 3–5 minutes.
• If the color darkens, repeat the removal process on damp hair until the desired color is achieved.

Care After the Procedure:
To complete the procedure, we recommend using Perfect Lamination STEP №3 by Nikk Mole.

Warning:

• Individual sensitivity to components is possible!

Storage Conditions:

• Keep out of reach of children.
• Store at a temperature of +5°C to +25°C.
• Avoid direct sunlight.