ELAN Supersonic serum 2

EYEBROW LAMINATION PROCEDURE STAGES

1) Analyze the condition of the client’s eyebrow hair

Determine the time of the eyebrow lamination procedure according to the instructions below:

1. type: eyebrow hairs are thick, spiky, have not previously undergone chemical procedures (eyebrow tinting or bleaching) – effect time for serum 1 is 5-8 minutes and for serum 2 no less than 6-8 minutes;

2. type: eyebrow hairs are of medium thickness, natural, healthy or have previously undergone chemical treatments (eyebrow tinting or bleaching procedures) – effect time for serum 1 is 3-5 minutes and for serum 2 6-8 minutes;

The working time of Multivitor is 5 minutes for all hair types.

Important! The effect time of Serum 1 and Serum 2 depends on the air temperature in the room. The higher the temperature, the shorter the reaction time.

2) Prepare the eyebrows for the lamination procedure.

Use “ÉLAN professional line Cleansing detox foam for eyebrows and eyelashes with antibacterial effect” to clean the hair and skin before the eyebrow lamination procedure. Remove the foam with a cotton pad moistened with water.

3) Create an eyebrow shape (serum 1)

Apply serum 1 to the eyebrows with a brush. It is important to observe the processing time set for the process and not to exceed it.

After the application time is over, remove the excess serum with a cotton pad moistened with water. When creating an eyebrow shape, it is important to consider the direction of eyebrow hair growth. Changes in the shape of the eyebrows should be smooth to avoid folding the hairs.

4) Fix the direction of the eyebrow hair (serum 2)

Apply serum 2 to the eyebrows and spread the hairs in the right direction. Serum amounts should be similar in each step. The effect time of the serum must not be less than 6 min.

When the action time is over, remove the excess serum with a cotton pad.

5) Eyebrow Multivitor (serum 3)

Apply and spread Multivitor on the eyebrows.

When the action time is over, remove the excess serum with a cotton pad

Duration of action 5 min.

Important! To finish the procedure, clean the eyebrows with a cotton pad moistened with «ÉLAN professional line Cleansing detox foam for eyebrows and eyelashes with antibacterial effect» to stop the chemical reaction, finally remove the foam with a cotton pad moistened with water.

Once the eyebrows have been cleaned with the «ÉLAN professional line Cleansing detox foam with antibacterial effect for eyebrows and eyelashes» product, the eyebrows are ready for chemical dyeing. Take into account that the chemical dye will adhere to the hairs faster after the eyebrow lamination procedure. Remove the chemical paint with a damp cotton pad.

STEPS OF THE LASH LIFT PROCEDURE

1) Analyze the condition of the client’s eyelashes

Set the time for the lash lift procedure according to the instructions below:

1. type: eyelashes are thick or straight – the effect time for serum 1 is 6-10 minutes and for serum 2 no less than 6 minutes;

2. type: eyelashes are of medium thickness or thin – the effect time for serum 1 is 3-6 minutes and for serum 2 no less than 6 minutes;

The working time of Multivitor is 5 minutes for all hair types.

Important! The effect time of Serum 1 and Serum 2 depends on the air temperature in the room. The higher the temperature, the shorter the reaction time.

2) Prepare the eyelashes for the lash lift procedure.

Use “ÉLAN professional line Cleansing detox foam for eyebrows and eyelashes with antibacterial effect” to clean the hair and skin before the lash lift procedure. Remove the foam with a cotton pad moistened with water.

3) Step 1 (Serum 1)

Apply serum 1 to the curling area of the eyelashes. It is important to observe the processing time set for the process and not to exceed it.

Remove excess product with a dry brush or cotton swab.

4) Step 2 (Serum 2)

Apply a thick layer of serum 2 to the entire lash area. Serum amounts should be similar in each step. The effect time of the serum must not be less than 6 min.

When the time is up, remove excess serum with a dry brush or cotton swab.

5) Step 3 (Multivitor)

Apply Multivitor to the entire lash area.

After the treatment time is over, remove the excess serum with a cotton pad moistened with water.

The working time of Multivitor is 5 minutes for all hair types.

Apply «ÉLAN professional line Cleansing detox-mousse for eyebrows and eyelashes with antibacterial effect» to stop the chemical reaction on the eyelashes. Remove the foam with a cotton pad moistened with water. Then the eyelashes are ready for chemical dyeing. Use «ÉLAN professional line Cleansing detox-mousse for eyebrows and eyelashes with antibacterial effect» even after the chemical eyelash dyeing procedure is over.

RECOMMENDATIONS FOR EYEBROWS AND EYELASHES AFTER THE PROCEDURE

Eyebrow tinting and eyebrow bleaching with henna is not recommended, because the result can be very unpredictable: the hair structure can be damaged (dry and dull hairs), which can cause hair fragility and loss.

It is recommended to avoid saunas, solariums after eyebrow lamination or the lash lift procedure (sleeping with the face on a pillow), to reduce the contact of eyebrows and eyelashes with water, as well as not to brush eyebrows and eyelashes within 24 hours after the procedure.

It is recommended to avoid the use of aggressive cosmetic products such as (exfoliators, face scrubs, alcohol-based lotions, laser treatments) within 48 hours after eyebrow lamination or eyelash lash lift procedure.